• 128×64 graphic LCD 　
• True RMS measuring 　
• Configuration of parameters by frontpanel push buttons or communication software 　
• RS485,RS232,or USB port for remote communication. 　
• Configurable fuel output energise to stop or energise to run. 　
• 7 Configurable inputs. 　
• 4 Configurable ouputs. 　
• 2 Analogue inputs configurable for differentsenders for Oil pressure and Engine temperature. 　
• 2 Aux,configurable analogue inputs.

GENUNIT 2.0 plant automation controller using microprocessor technology to achieve a variety of parameters, precision measurement, valuation adjustment, as well as timing, threshold setting and other functions, all the parameters from the controller can adjust the front panel, or use the PC computer through programming interface to adjust, but also the use of PC computer through RS485 interface adjustments and monitoring. Of its compact structure, wiring simple, high reliability, can be widely used in various types of generating sets automation systems.Its main features are as follows: 　

• LCD large-screen LCD, with backlight, real-time data clearly indicated that the touch of a button operation;
• have a RS485 communication interface, using MODBUS protocol can achieve the "three remote" function; 　
• suitable for three-phase four-wire, single-phase second-tier, two-phase three-wire (120/240V) power supply 50/60Hz systems.
• acquisition and display electricity / power generation three-phase voltage, three-phase current, frequency, power parameters; 　
• electricity with overvoltage, undervoltage, lack of functional, power generation, with the overvoltage, undervoltage, over-frequent and less frequent, over-current function; 　
• control and protection functions: to achieve auto-start diesel generator set / stop, co-sub-gate (ATS switch) and improving the protection Fault display function; 　
• have had power shut down, idle speed control, preheat control functions, and both relay outputs. 　
• parameter setting function: allows the user to change settings of its parameters, while the internal FLASH memory of memory in the system will not be lost when power-down, the controller all parameters may be set on the front panel can also be programmed to I use PC-test software set (using the SG72 adapter); 　
• a variety of temperature, pressure, oil level sensor can be used directly, and can custom parameters; Genunit 2.0 manual 　
• the success of a variety of starting conditions (speed sensor, hydraulic, power generation) option; 　
• Wide range of power supply (8-35) VDC, can cope with different starter battery voltage of the environment; 　 　 　
• All parameters are adjusted using digital technology, eliminating the conventional analog potentiometer adjustment methods to improve the reliability and stability of the machine; 　
• modular structure design, form factor pluggable terminal blocks, embedded installation, compact structure, easy installation.

Module DSE7320 AMF, for single genset with a series of senior functions, used for switch-on & switch-off control of electricor non-electric diesel & gas genset, also fpr Mains charge monitoring. 　Module includes USB, RS232 & RS485 connection & DSENet external connection. Easily operate,clear screen, Impoved functions include synchronous clock, upgrading monitoring capacity; ethernet reducing monitoring cost; pre-protection, examming accessory fault before big demage.

self-startup module DSE7510, ofr parallel & load distribution of electric of mon-electric diesel & gas genset, supplying advanced monitoring & protective functions.

Loading distritive function realizs the automatic sychronization with huilt-in synchronous indicator & parallel output. Module can connect with the velometer & AVR.

At most module can support parallel of 16 gensets & 16 lines Mains change, a system can support 20 lines electric supply. For instance, 16gensets & 4 lines Mains change can oprate simultaneously.(module 7560 should be used in the parallel system)
　
module will monitor over pressure/low pressure, over current,over lock/low lock, over speed, charge fail, emergency stop, low iol pressure, high temprerature, startup fail, high/low DC voltage, swic-off fail,short circuit protection, counter power rate, phase fault, grounded protection,sensor missing alarm, fold/unfold fail, non-synchronous, MPU signal missing switch-off protection, positive phase sequence switch-off protection & excite missing of althernator.